Electric Vehicle Fire Suppression Solution - portable extinguishing water tank
Recently there are lots of fire cases reported from the electric vehicle.
The EV fire case is quite different with other vehicle fire, with lithium-ion battery it can be very dangerous.
Potable water tank to inundate the battery and effectively extinguish the fire and prevent the lithium-ion battery explode.
The chamber can be easily inflated and installed over the fired vehicle to pour the water and sink the battery at the bottom part of the car, and it is effective way to reduce the water wasted by shooting the water to the vehicle.
" LIFT RAFT SKILL UTILIZED FAST DEPLOYMENT AND QUICK ON-SITE RESPONSE"
* Specification
- Size : Inside, 3m × 6m, bottom tube Ø0.35m, top tube Ø0.25m
Height (Bottom + Top tube installed) : 0.6m
Bottom tube: Water tube / Top tube: CO2 air tube
- Weight : About 75kg(CO2 cylinder excluded)
- Personnel (Installation) : 4
- Installation time : About 15 min
1. The potable mobile water tank have an
independent air chamber with an upper chamber (air injection) and a lower
chamber (water injection)
2. Pull the connecting line of CO₂ cylinder of upper air chamber and expand the tank shape. It takes about 2 min. (The air respirator cylinder of firefighters as personal respiratory protection equipment can be used also)
3. 4 people move the tank over the fired vehicle, connect water hose to lower chamber, and fill the tank.
4. Fill the water tank and also can spray water toward the fired vehicle.
SG safety corporation has produced the military boat for decades, and has technology and know-how of producing the flame-retardant fabric (called CSM rubber coated fabric) in-house and producing the air chamber in-house. Also not just one-time use and can be used several times with maintenance after use.
This potable water tank is good to be equipped for the fire fighters, and also the building or site management as a pre-action before fire fighters arrives. As the flame-retardant fabric is quite expensive material so someone could think this is quite too expensive to be equipped, but always, there is nothing like being well prepared.
If you are interested in Portable extinguishing water tank and need more information, feel free to contact us!
- Size : Inside, 3m × 6m, bottom tube Ø0.35m, top tube Ø0.25m
Height (Bottom + Top tube installed) : 0.6m
Bottom tube: Water tube / Top tube: CO2 air tube
- Weight : About 75kg(CO2 cylinder excluded)
- Personnel (Installation) : 4
- Installation time : About 15 min
2. Pull the connecting line of CO₂ cylinder of upper air chamber and expand the tank shape. It takes about 2 min. (The air respirator cylinder of firefighters as personal respiratory protection equipment can be used also)
3. 4 people move the tank over the fired vehicle, connect water hose to lower chamber, and fill the tank.
4. Fill the water tank and also can spray water toward the fired vehicle.
SG safety corporation has produced the military boat for decades, and has technology and know-how of producing the flame-retardant fabric (called CSM rubber coated fabric) in-house and producing the air chamber in-house. Also not just one-time use and can be used several times with maintenance after use.
This potable water tank is good to be equipped for the fire fighters, and also the building or site management as a pre-action before fire fighters arrives. As the flame-retardant fabric is quite expensive material so someone could think this is quite too expensive to be equipped, but always, there is nothing like being well prepared.
If you are interested in Portable extinguishing water tank and need more information, feel free to contact us!
Check out our other postings followed, we will share on material information of Portable extinguishing water tank.
댓글
댓글 쓰기